Advantages of FFC Cable Circuit

Advantages of FFC cable circuit

1. The single-sided flexible ffc cable board is the lowest cost printed board with low electrical performance requirements. When single-sided wiring, single-sided flexible ffc cable board should be used. It has a layer of chemically etched conductive patterns, and the conductive pattern layer on the surface of the flexible insulating substrate is a rolled copper foil. The insulating substrate can be polyimide, polyethylene terephthalate, aramid cellulose ester and polyvinyl chloride.

2. The double-sided flexible ffc cable board is a conductive pattern made by etching on both sides of the insulating base film. The metallized hole connects the patterns on both sides of the insulating material to form a conductive path to meet the design and use function of flexibility. The cover film can protect single and double-sided wires and indicate where the components are placed.

3. Multi-layer flexible ffc wiring board is to laminate 3 or more layers of single-sided or double-sided flexible circuits together, and form metallized holes by drilling and electroplating to form conductive paths between different layers. In this way, there is no need to use a complicated welding process. Multilayer circuits have huge functional differences in terms of higher reliability, better thermal conductivity and more convenient assembly performance. When designing the layout, the mutual influence of assembly size, number of layers and flexibility should be considered.

4. The traditional rigid and flexible ffc cable board is composed of rigid and flexible substrates selectively laminated together. The structure is compact, and the conductive connection is formed with metalized holes. If there are components on the front and back of a printed board, the rigid flexible ffc cable board is a good choice. But if all the components are on one side, it will be more economical to choose a double-sided flexible ffc cable board and laminate a layer of FR4 reinforcement material on its back.

5. The flexible circuit with mixed structure is a multi-layer board, and the conductive layer is made of different metals. An 8-layer board is used, FR-4 is used as the inner layer medium, and polyimide is used as the outer layer medium. Leads extend from three different directions of the main board, and each lead is made of a different metal. Constantan alloy, copper and gold are used as independent leads. This kind of hybrid structure is mostly used in the relationship between electrical signal conversion and heat conversion and under low temperature conditions where the electrical performance is relatively harsh, and it is the only feasible solution.